ffmpeg-python: Python bindings for FFmpeg

Github:https://github.com/kkroening/ffmpeg-python
ffmpeg.colorchannelmixer(parent_node, *args, **kwargs)

Adjust video input frames by re-mixing color channels.

Official documentation: colorchannelmixer

ffmpeg.concat(*parent_nodes, **kwargs)

Concatenate audio and video streams, joining them together one after the other.

The filter works on segments of synchronized video and audio streams. All segments must have the same number of streams of each type, and that will also be the number of streams at output.

Parameters:unsafe – Activate unsafe mode: do not fail if segments have a different format.

Related streams do not always have exactly the same duration, for various reasons including codec frame size or sloppy authoring. For that reason, related synchronized streams (e.g. a video and its audio track) should be concatenated at once. The concat filter will use the duration of the longest stream in each segment (except the last one), and if necessary pad shorter audio streams with silence.

For this filter to work correctly, all segments must start at timestamp 0.

All corresponding streams must have the same parameters in all segments; the filtering system will automatically select a common pixel format for video streams, and a common sample format, sample rate and channel layout for audio streams, but other settings, such as resolution, must be converted explicitly by the user.

Different frame rates are acceptable but will result in variable frame rate at output; be sure to configure the output file to handle it.

Official documentation: concat

ffmpeg.drawbox(parent_node, x, y, width, height, color, thickness=None, **kwargs)

Draw a colored box on the input image.

Parameters:
  • x – The expression which specifies the top left corner x coordinate of the box. It defaults to 0.
  • y – The expression which specifies the top left corner y coordinate of the box. It defaults to 0.
  • width – Specify the width of the box; if 0 interpreted as the input width. It defaults to 0.
  • heigth – Specify the height of the box; if 0 interpreted as the input height. It defaults to 0.
  • color – Specify the color of the box to write. For the general syntax of this option, check the “Color” section in the ffmpeg-utils manual. If the special value invert is used, the box edge color is the same as the video with inverted luma.
  • thickness – The expression which sets the thickness of the box edge. Default value is 3.
  • w – Alias for width.
  • h – Alias for height.
  • c – Alias for color.
  • t – Alias for thickness.

Official documentation: drawbox

ffmpeg.hflip(parent_node)

Flip the input video horizontally.

Official documentation: hflip

ffmpeg.hue(parent_node, **kwargs)

Modify the hue and/or the saturation of the input.

Parameters:
  • h – Specify the hue angle as a number of degrees. It accepts an expression, and defaults to “0”.
  • s – Specify the saturation in the [-10,10] range. It accepts an expression and defaults to “1”.
  • H – Specify the hue angle as a number of radians. It accepts an expression, and defaults to “0”.
  • b – Specify the brightness in the [-10,10] range. It accepts an expression and defaults to “0”.

Official documentation: hue

ffmpeg.overlay(main_parent_node, overlay_parent_node, eof_action=’repeat’, **kwargs)

Overlay one video on top of another.

Parameters:
  • x – Set the expression for the x coordinates of the overlaid video on the main video. Default value is 0. In case the expression is invalid, it is set to a huge value (meaning that the overlay will not be displayed within the output visible area).
  • y – Set the expression for the y coordinates of the overlaid video on the main video. Default value is 0. In case the expression is invalid, it is set to a huge value (meaning that the overlay will not be displayed within the output visible area).
  • eof_action –

    The action to take when EOF is encountered on the secondary input; it accepts one of the following values:

    • repeat: Repeat the last frame (the default).
    • endall: End both streams.
    • pass: Pass the main input through.
  • eval –

    Set when the expressions for x, and y are evaluated. It accepts the following values:

    • init: only evaluate expressions once during the filter initialization or when a command is
      processed
    • frame: evaluate expressions for each incoming frame

    Default value is frame.

  • shortest – If set to 1, force the output to terminate when the shortest input terminates. Default value is 0.
  • format –

    Set the format for the output video. It accepts the following values:

    • yuv420: force YUV420 output
    • yuv422: force YUV422 output
    • yuv444: force YUV444 output
    • rgb: force packed RGB output
    • gbrp: force planar RGB output

    Default value is yuv420.

  • rgb (deprecated) – If set to 1, force the filter to accept inputs in the RGB color space. Default value is 0. This option is deprecated, use format instead.
  • repeatlast – If set to 1, force the filter to draw the last overlay frame over the main input until the end of the stream. A value of 0 disables this behavior. Default value is 1.

Official documentation: overlay

ffmpeg.setpts(parent_node, expr)

Change the PTS (presentation timestamp) of the input frames.

Parameters:expr – The expression which is evaluated for each frame to construct its timestamp.

Official documentation: setpts, asetpts

ffmpeg.trim(parent_node, **kwargs)

Trim the input so that the output contains one continuous subpart of the input.

Parameters:
  • start – Specify the time of the start of the kept section, i.e. the frame with the timestamp start will be the first frame in the output.
  • end – Specify the time of the first frame that will be dropped, i.e. the frame immediately preceding the one with the timestamp end will be the last frame in the output.
  • start_pts – This is the same as start, except this option sets the start timestamp in timebase units instead of seconds.
  • end_pts – This is the same as end, except this option sets the end timestamp in timebase units instead of seconds.
  • duration – The maximum duration of the output in seconds.
  • start_frame – The number of the first frame that should be passed to the output.
  • end_frame – The number of the first frame that should be dropped.

Official documentation: trim

ffmpeg.vflip(parent_node)

Flip the input video vertically.

Official documentation: vflip

ffmpeg.zoompan(parent_node, **kwargs)

Apply Zoom & Pan effect.

Parameters:
  • zoom – Set the zoom expression. Default is 1.
  • x – Set the x expression. Default is 0.
  • y – Set the y expression. Default is 0.
  • d – Set the duration expression in number of frames. This sets for how many number of frames effect will last for single input image.
  • s – Set the output image size, default is hd720.
  • fps – Set the output frame rate, default is 25.
  • z – Alias for zoom.

Official documentation: zoompan

ffmpeg.input(filename)

Input file URL (ffmpeg -i option)

Official documentation: Main options

ffmpeg.merge_outputs(*parent_nodes)
ffmpeg.output(parent_node, filename)

Output file URL

Official documentation: Synopsis

ffmpeg.overwrite_output(parent_node)

Overwrite output files without asking (ffmpeg -y option)

Official documentation: Main options

ffmpeg.get_args(node)

Get command-line arguments for ffmpeg.

ffmpeg.run(node, cmd=’ffmpeg’)

Run ffmpeg on node graph.

Indices and tables