# ffmpeg-python: Python bindings for FFmpeg

Github: | https://github.com/kkroening/ffmpeg-python

`ffmpeg.``colorchannelmixer`(stream, *args, **kwargs)

  Adjust video input frames by re-mixing color channels.

  Official documentation: colorchannelmixer

`ffmpeg.``concat`(*streams, **kwargs)

  Concatenate audio and video streams, joining them together one after the other.

  The filter works on segments of synchronized video and audio streams. All segments must have the same number of streams of each type, and that will also be the number of streams at output.

  Parameters: | unsafe – Activate unsafe mode: do not fail if segments have a different format.

  Related streams do not always have exactly the same duration, for various reasons including codec frame size or sloppy authoring. For that reason, related synchronized streams (e.g. a video and its audio track) should be concatenated at once. The concat filter will use the duration of the longest stream in each segment (except the last one), and if necessary pad shorter audio streams with silence.

  For this filter to work correctly, all segments must start at timestamp 0.

  All corresponding streams must have the same parameters in all segments; the filtering system will automatically select a common pixel format for video streams, and a common sample format, sample rate and channel layout for audio streams, but other settings, such as resolution, must be converted explicitly by the user.

  Different frame rates are acceptable but will result in variable frame rate at output; be sure to configure the output file to handle it.

  Official documentation: concat

`ffmpeg.``crop`(stream, x, y, width, height, **kwargs)

  Crop the input video.

  Parameters: | x – The horizontal position, in the input video, of the left edge of the output video. y – The vertical position, in the input video, of the top edge of the output video. width – The width of the output video. Must be greater than 0. heigth – The height of the output video. Must be greater than 0.

  Official documentation: crop

`ffmpeg.``drawbox`(stream, x, y, width, height, color, thickness=None, **kwargs)

  Draw a colored box on the input image.

  Parameters: | x – The expression which specifies the top left corner x coordinate of the box. It defaults to 0. y – The expression which specifies the top left corner y coordinate of the box. It defaults to 0. width – Specify the width of the box; if 0 interpreted as the input width. It defaults to 0. heigth – Specify the height of the box; if 0 interpreted as the input height. It defaults to 0. color – Specify the color of the box to write. For the general syntax of this option, check the “Color” section in the ffmpeg-utils manual. If the special value invert is used, the box edge color is the same as the video with inverted luma. thickness – The expression which sets the thickness of the box edge. Default value is 3. w – Alias for `width`. h – Alias for `height`. c – Alias for `color`. t – Alias for `thickness`.

  Official documentation: drawbox

`ffmpeg.``drawtext`(stream, text=None, x=0, y=0, escape_text=True, **kwargs)

  Draw a text string or text from a specified file on top of a video, using the libfreetype library.

  To enable compilation of this filter, you need to configure FFmpeg with `--enable-libfreetype`. To enable default font fallback and the font option you need to configure FFmpeg with `--enable-libfontconfig`. To enable the text_shaping option, you need to configure FFmpeg with `--enable-libfribidi`.

  Parameters: | box – Used to draw a box around text using the background color. The value must be either 1 (enable) or 0 (disable). The default value of box is 0. boxborderw – Set the width of the border to be drawn around the box using boxcolor. The default value of boxborderw is 0. boxcolor – The color to be used for drawing box around text. For the syntax of this option, check the “Color” section in the ffmpeg-utils manual. The default value of boxcolor is “white”. line_spacing – Set the line spacing in pixels of the border to be drawn around the box using box. The default value of line_spacing is 0. borderw – Set the width of the border to be drawn around the text using bordercolor. The default value of borderw is 0. bordercolor – Set the color to be used for drawing border around text. For the syntax of this option, check the “Color” section in the ffmpeg-utils manual. The default value of bordercolor is “black”. expansion – Select how the text is expanded. Can be either none, strftime (deprecated) or normal (default). See the Text expansion section below for details. basetime – Set a start time for the count. Value is in microseconds. Only applied in the deprecated strftime expansion mode. To emulate in normal expansion mode use the pts function, supplying the start time (in seconds) as the second argument. fix_bounds – If true, check and fix text coords to avoid clipping. fontcolor – The color to be used for drawing fonts. For the syntax of this option, check the “Color” section in the ffmpeg-utils manual. The default value of fontcolor is “black”. fontcolor_expr – String which is expanded the same way as text to obtain dynamic fontcolor value. By default this option has empty value and is not processed. When this option is set, it overrides fontcolor option. font – The font family to be used for drawing text. By default Sans. fontfile – The font file to be used for drawing text. The path must be included. This parameter is mandatory if the fontconfig support is disabled. alpha – Draw the text applying alpha blending. The value can be a number between 0.0 and 1.0. The expression accepts the same variables x, y as well. The default value is 1. Please see fontcolor_expr. fontsize – The font size to be used for drawing text. The default value of fontsize is 16. text_shaping – If set to 1, attempt to shape the text (for example, reverse the order of right-to-left text and join Arabic characters) before drawing it. Otherwise, just draw the text exactly as given. By default 1 (if supported). ft_load_flags – The flags to be used for loading the fonts. The flags map the corresponding flags supported by libfreetype, and are a combination of the following values: `default` `no_scale` `no_hinting` `render` `no_bitmap` `vertical_layout` `force_autohint` `crop_bitmap` `pedantic` `ignore_global_advance_width` `no_recurse` `ignore_transform` `monochrome` `linear_design` `no_autohint` Default value is “default”. For more information consult the documentation for the FT_LOAD_* libfreetype flags. shadowcolor – The color to be used for drawing a shadow behind the drawn text. For the syntax of this option, check the “Color” section in the ffmpeg-utils manual. The default value of shadowcolor is “black”. shadowx – The x offset for the text shadow position with respect to the position of the text. It can be either positive or negative values. The default value is “0”. shadowy – The y offset for the text shadow position with respect to the position of the text. It can be either positive or negative values. The default value is “0”. start_number – The starting frame number for the n/frame_num variable. The default value is “0”. tabsize – The size in number of spaces to use for rendering the tab. Default value is 4. timecode – Set the initial timecode representation in “hh:mm:ss[:;.]ff” format. It can be used with or without text parameter. timecode_rate option must be specified. rate – Set the timecode frame rate (timecode only). timecode_rate – Alias for `rate`. r – Alias for `rate`. tc24hmax – If set to 1, the output of the timecode option will wrap around at 24 hours. Default is 0 (disabled). text – The text string to be drawn. The text must be a sequence of UTF-8 encoded characters. This parameter is mandatory if no file is specified with the parameter textfile. textfile – A text file containing text to be drawn. The text must be a sequence of UTF-8 encoded characters. This parameter is mandatory if no text string is specified with the parameter text. If both text and textfile are specified, an error is thrown. reload – If set to 1, the textfile will be reloaded before each frame. Be sure to update it atomically, or it may be read partially, or even fail. x – The expression which specifies the offset where text will be drawn within the video frame. It is relative to the left border of the output image. The default value is “0”. y – The expression which specifies the offset where text will be drawn within the video frame. It is relative to the top border of the output image. The default value is “0”. See below for the list of accepted constants and functions.

  Expression constants:
    The parameters for x and y are expressions containing the following constants and functions:
      - dar: input display aspect ratio, it is the same as `(w / h) * sar`
      - hsub: horizontal chroma subsample values. For example for the pixel format “yuv422p” hsub is 2 and vsub is 1.
      - vsub: vertical chroma subsample values. For example for the pixel format “yuv422p” hsub is 2 and vsub is 1.
      - line_h: the height of each text line
      - lh: Alias for `line_h`.
      - main_h: the input height
      - h: Alias for `main_h`.
      - H: Alias for `main_h`.
      - main_w: the input width
      - w: Alias for `main_w`.
      - W: Alias for `main_w`.
      - ascent: the maximum distance from the baseline to the highest/upper grid coordinate used to place a glyph outline point, for all the rendered glyphs. It is a positive value, due to the grid’s orientation with the Y axis upwards.
      - max_glyph_a: Alias for `ascent`.
      - descent: the maximum distance from the baseline to the lowest grid coordinate used to place a glyph outline point, for all the rendered glyphs. This is a negative value, due to the grid’s orientation, with the Y axis upwards.
      - max_glyph_d: Alias for `descent`.
      - max_glyph_h: maximum glyph height, that is the maximum height for all the glyphs contained in the rendered text, it is equivalent to ascent - descent.
      - max_glyph_w: maximum glyph width, that is the maximum width for all the glyphs contained in the rendered text.
      - n: the number of input frame, starting from 0
      - rand(min, max): return a random number included between min and max
      - sar: The input sample aspect ratio.
      - t: timestamp expressed in seconds, NAN if the input timestamp is unknown
      - text_h: the height of the rendered text
      - th: Alias for `text_h`.
      - text_w: the width of the rendered text
      - tw: Alias for `text_w`.
      - x: the x offset coordinates where the text is drawn.
      - y: the y offset coordinates where the text is drawn.

    These parameters allow the x and y expressions to refer each other, so you can for example specify `y=x/dar`.

  Official documentation: drawtext

`ffmpeg.``filter_`(stream_spec, filter_name, *args, **kwargs)

  Apply custom filter.

  `filter_` is normally used by higher-level filter functions such as `hflip`, but if a filter implementation is missing from `fmpeg-python`, you can call `filter_` directly to have `fmpeg-python` pass the filter name and arguments to ffmpeg verbatim.

  Parameters: | stream_spec – a Stream, list of Streams, or label-to-Stream dictionary mapping filter_name – ffmpeg filter name, e.g. colorchannelmixer *args – list of args to pass to ffmpeg verbatim **kwargs – list of keyword-args to pass to ffmpeg verbatim

  The function name is suffixed with `_` in order avoid confusion with the standard python `filter` function.

  Example

  `ffmpeg.input('in.mp4').filter_('hflip').output('out.mp4').run()`

`ffmpeg.``filter_multi_output`(stream_spec, filter_name, *args, **kwargs)

  Apply custom filter with one or more outputs.

  This is the same as `filter_` except that the filter can produce more than one output.

  To reference an output stream, use either the `.stream` operator or bracket shorthand:

  Example

  `` split = ffmpeg.input('in.mp4').filter_multi_output('split') split0 = split.stream(0) split1 = split[1] ffmpeg.concat(split0, split1).output('out.mp4').run() ``

`ffmpeg.``hflip`(stream)

  Flip the input video horizontally.

  Official documentation: hflip

`ffmpeg.``hue`(stream, **kwargs)

  Modify the hue and/or the saturation of the input.

  Parameters: | h – Specify the hue angle as a number of degrees. It accepts an expression, and defaults to “0”. s – Specify the saturation in the [-10,10] range. It accepts an expression and defaults to “1”. H – Specify the hue angle as a number of radians. It accepts an expression, and defaults to “0”. b – Specify the brightness in the [-10,10] range. It accepts an expression and defaults to “0”.

  Official documentation: hue

`ffmpeg.``overlay`(main_parent_node, overlay_parent_node, eof_action=u'repeat', **kwargs)

  Overlay one video on top of another.

  Parameters: | x – Set the expression for the x coordinates of the overlaid video on the main video. Default value is 0. In case the expression is invalid, it is set to a huge value (meaning that the overlay will not be displayed within the output visible area). y – Set the expression for the y coordinates of the overlaid video on the main video. Default value is 0. In case the expression is invalid, it is set to a huge value (meaning that the overlay will not be displayed within the output visible area). eof_action – The action to take when EOF is encountered on the secondary input; it accepts one of the following values: `repeat`: Repeat the last frame (the default). `endall`: End both streams. `pass`: Pass the main input through. eval – Set when the expressions for x, and y are evaluated. It accepts the following values: `init`: only evaluate expressions once during the filter initialization or when a command is processed `frame`: evaluate expressions for each incoming frame Default value is `frame`. shortest – If set to 1, force the output to terminate when the shortest input terminates. Default value is 0. format – Set the format for the output video. It accepts the following values: `yuv420`: force YUV420 output `yuv422`: force YUV422 output `yuv444`: force YUV444 output `rgb`: force packed RGB output `gbrp`: force planar RGB output Default value is `yuv420`. rgb (deprecated) – If set to 1, force the filter to accept inputs in the RGB color space. Default value is 0. This option is deprecated, use format instead. repeatlast – If set to 1, force the filter to draw the last overlay frame over the main input until the end of the stream. A value of 0 disables this behavior. Default value is 1.

  Official documentation: overlay

`ffmpeg.``setpts`(stream, expr)

  Change the PTS (presentation timestamp) of the input frames.

  Parameters: | expr – The expression which is evaluated for each frame to construct its timestamp.

  Official documentation: setpts, asetpts

`ffmpeg.``trim`(stream, **kwargs)

  Trim the input so that the output contains one continuous subpart of the input.

  Parameters: | start – Specify the time of the start of the kept section, i.e. the frame with the timestamp start will be the first frame in the output. end – Specify the time of the first frame that will be dropped, i.e. the frame immediately preceding the one with the timestamp end will be the last frame in the output. start_pts – This is the same as start, except this option sets the start timestamp in timebase units instead of seconds. end_pts – This is the same as end, except this option sets the end timestamp in timebase units instead of seconds. duration – The maximum duration of the output in seconds. start_frame – The number of the first frame that should be passed to the output. end_frame – The number of the first frame that should be dropped.

  Official documentation: trim

`ffmpeg.``vflip`(stream)

  Flip the input video vertically.

  Official documentation: vflip

`ffmpeg.``zoompan`(stream, **kwargs)

  Apply Zoom & Pan effect.

  Parameters: | zoom – Set the zoom expression. Default is 1. x – Set the x expression. Default is 0. y – Set the y expression. Default is 0. d – Set the duration expression in number of frames. This sets for how many number of frames effect will last for single input image. s – Set the output image size, default is `hd720`. fps – Set the output frame rate, default is 25. z – Alias for `zoom`.

  Official documentation: zoompan

`ffmpeg.``input`(filename, **kwargs)

  Input file URL (ffmpeg `-i` option)

  Any supplied kwargs are passed to ffmpeg verbatim (e.g. `t=20`, `f='mp4'`, `acodec='pcm'`, etc.).

  To tell ffmpeg to read from stdin, use `pipe:` as the filename.

  Official documentation: Main options

`ffmpeg.``merge_outputs`(*streams)

  Include all given outputs in one ffmpeg command line

`ffmpeg.``output`(*streams_and_filename, **kwargs)

  Output file URL

  Syntax:
    ffmpeg.output(stream1[, stream2, stream3…], filename, **ffmpeg_args)

  If multiple streams are provided, they are mapped to the same output.

  Any supplied kwargs are passed to ffmpeg verbatim (e.g. `t=20`, `f='mp4'`, `acodec='pcm'`, etc.).

  To tell ffmpeg to write to stdout, use `pipe:` as the filename.

  Official documentation: Synopsis

`ffmpeg.``overwrite_output`(stream)

  Overwrite output files without asking (ffmpeg `-y` option)

  Official documentation: Main options

`ffmpeg.``compile`(stream_spec, cmd=u'ffmpeg', overwrite_output=False)

  Build command-line for invoking ffmpeg.

  The `run()` function uses this to build the commnad line arguments and should work in most cases, but calling this function directly is useful for debugging or if you need to invoke ffmpeg manually for whatever reason.

  This is the same as calling `get_args()` except that it also includes the `ffmpeg` command as the first argument.

exception `ffmpeg.``Error`(stream_spec, stdout, stderr)

  Bases: `exceptions.Exception`

`ffmpeg.``get_args`(stream_spec, overwrite_output=False)

  Build command-line arguments to be passed to ffmpeg.

`ffmpeg.``run`(stream_spec, cmd=u'ffmpeg', capture_stdout=False, capture_stderr=False, input=None, quiet=False, overwrite_output=False)

  Ivoke ffmpeg for the supplied node graph.

  Parameters: | capture_stdout – if True, capture stdout (to be used with `pipe:` ffmpeg outputs). capture_stderr – if True, capture stderr. quiet – shorthand for setting `capture_stdout` and `capture_stderr`. input – text to be sent to stdin (to be used with `pipe:` ffmpeg inputs) **kwargs – keyword-arguments passed to `get_args()` (e.g. `overwrite_output=True`).

  Returns: (out, err) tuple containing captured stdout and stderr data.

`ffmpeg.``view`(stream_spec, **kwargs)

`ffmpeg.``probe`(filename)

  Run ffprobe on the specified file and return a JSON representation of the output.

  Raises: | `ffmpeg.Error` – if ffprobe returns a non-zero exit code, an `Error` is returned with a generic error message. The stderr output can be retrieved by accessing the `stderr` property of the exception.

# Indices and tables

- Index
- Module Index
- Search Page